DigiDesign D-Control Specifications download pdf (Page 56)

D-Control Guide48

Encoder LED Ring

Each encoder has a ring of 15 three-color LEDs. Discrete or

stepped information is shown by single LEDs, and continu-

ously variable information is shown by an expanding series of

LEDs.

In Normal mode, encoder LED rings can show send level, pan

position, plug-in parameter values, and mic pre settings. In

Flip mode, they show track level.

Instrument Tracks

On Instrument tracks, the bottom encoder LED ring shows

MIDI Velocity.

VCA Master Tracks

On VCA Master tracks, encoder LED rings show levels of slave

tracks.

Encoder Automation Mode Indicator

Below each encoder knob is an LED marked “auto,” which

lights when the corresponding parameter is enabled for auto-

mation. The indicator lights green for Read mode, solid yellow

when armed for automation in any of the Write modes, and

flashes red when writing automation in any of the Write

modes.

Encoder Display

Each encoder has a six-character display that shows parameter

names. When the corresponding encoder knob is touched or

moved, the display shows parameter values.

Encoder displays use colors and backlighting to indicate the

following:

• Green: Default color for input, insert, send, pan, and mic

pre parameter names and values

• Inverted green: Inactive input, inactive output, inactive

plug-in or inactive send names

• Yellow: Assignment options in Assign mode, any param-

eters in Flip mode

• Red: Clipped plug-in, send or channel

Dynamics and EQ Plug-in Indicators

When viewing inserts on an encoder, these LEDs light to indi-

cate the presence of a Dynamics plug-in (yellow LED) or EQ

plug-in (green LED).

Mute and Pre Indicators

When viewing sends on an encoder, these LEDs light to indi-

cate that the send is muted (red LED) or set to pre-fader oper-

ation (green LED).

Encoder Select Switch

Each encoder has a Select switch that is used to assign an in-

sert or send to that encoder, or to display insert or send

parameters for editing.

Inserts

When assigning an insert, the encoder Select switch is used to

confirm the selection of the following elements on each level:

• Insert type (TDM plug-in, RTAS plug-in, Multi-Mono

TDM plug-in, Multi-Mono RTAS plug-in, or Hardware

Insert)

• Plug-in subfolder (such as EQ, Dynamics, Pitch Shift,

Reverb, or Delay)

• Individual insert or plug-in

When viewing a plug-in, the encoder Select switch is used to

display and edit plug-in parameters on that channel’s rotary

encoders.

Sends

When assigning a send, the encoder Select switch is used to

confirm the selection of the following:

• Send type (interface or bus)

• Send assignment

When viewing a send, the encoder Select switch is used to dis-

play and edit send pan information on that channel’s rotary

encoders.

VCA Master Tracks

On VCA Master tracks, encoder Select switches focus the cor-

responding slave tracks in the Focus Channel Strip.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 163 164

DigiDesign D-Control Specifications Page 56

Comments to this Manuals

DigiDesign D-Control Specifications Page 56

Comments to this Manuals

Related products and manuals for Recording Equipment DigiDesign D-Control