DigiDesign D-Control Specifications download pdf (Page 15)

Chapter 2: Hardware Overview and Stand-Alone Operation 11

PRE Back Panel

PRE has the following back panel connectors:

Mic Inputs 1–8

These are balanced XLR jacks, with Pin 1 wired

ground, Pin 2 wired hot (or “+”), and Pin 3 wired

cold (or “–”).

Use these jacks for microphone connections or

for line level devices that support balanced XLR

connectors.

Line/Inst (Line Level/Instrument)

Inputs 1–8

These are balanced 1/4-inch TRS jacks, with Tip

wired hot (or “+”), Ring cold (“–”), and Sleeve

ground.

Unbalanced connections are supported with the

use of standard 1/4-inch mono phone plugs. If

using line inputs with balanced line level de-

vices, be sure to use balanced to balanced cables

to maximize performance.

DB-25 Outputs 1–8

This is a balanced DB-25 connector for line out-

puts 1–8. For pinouts, see Appendix B, “Pinout

Diagram for the PRE DB-25 Connector.”

This connector can also output a fixed oscillator

signal on each channel. For more information,

see “OSC (Oscillator) Switch and LED” on

page 6.

Send and Return Inserts 1–8

These are balanced 1/4-inch TRS Send and

1/4-inch TRS Return jacks, with Tip wired hot

(or “+”), Ring cold (“–”), and Sleeve ground. In-

sert send levels are post output trim.

Use these jacks for inserting external devices

such as compressors or equalizers in the audio

path before recording to disk. Sends can also be

used as line outputs; in this case, all front panel

controls will affect the signal, except Mute.

Return channels 1–8 can be bypassed from the

front panel, or through remote control.

PRE back panel

Send and Return Inserts 1–8

Mic Inputs 1–8

Line/Inst Inputs 1–8

DB-25 Outputs 1–8

Output Trims 1–8

MIDI In/Out/Thru

Oscillator Output

Auto-switching power

supply connector

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Comments to this Manuals

No comments

DigiDesign D-Control Specifications Page 15

Comments to this Manuals

Related products and manuals for Recording Equipment DigiDesign D-Control