DigiDesign D-Control Specifications download pdf (Page 19)

Chapter 2: Hardware Overview and Stand-Alone Operation 15

Adjusting Channel Controls

Most PRE parameters can be changed with front

panel channel control switches; for a descrip-

tion of each switch, see “PRE Front Panel” on

page 5. Input Gain is changed with the

Gain/Param control (see “Adjusting Input Gain”

on page 16).

PRE channel controls can be applied to one or

more channels at a time.

To select one channel:

 Press the Select switch of the desired channel.

Selecting one channel deselects the previously

selected channel or channels.

To select multiple channels:

 Hold Shift and press the Select switch of any

channels you want to adjust.

When more than one channel is selected, meter-

ing, control states, and Gain/Param settings

reflect the activity of the leftmost channel of the

group.

Adjustments made to any selected channel are

made to all selected channels. See “Mixed State

Operating Mode While Editing Multiple Chan-

nels” on page 15.

To change a setting with a channel control switch:

1 Select one or more channels.

2 Press a channel control switch to change its

current setting. For example, if the 48V LED is

off, pressing 48V will enable 48V phantom

power on all the selected channels. (48V can

only be enabled when input source is set for Mic

input. It is disabled as a choice when input

source is set for line or DI input.)

To return the selection to a single channel:

 Press Shift to disengage, then press the Select

switch of the individual channel you want to

edit.

Mixed State Operating Mode While Editing

Multiple Channels

A mixed state operating mode exists when you

are editing multiple channels simultaneously,

and some of the channels have different set-

tings.

Channel Control Switches

When multiple channels are selected, switch

modifications made to one selected channel are

automatically applied to all selected channels.

Gain/Param and Input Gain

If an offset exists between selected channels, the

offset will be maintained while moving the

Gain/Param control until you reach +69 dB

gain or 0 dB, at which point the selected chan-

nels will mirror each other.

To quickly select all channels, drag your

finger across all the Select switches.

Gain offsets are retained when multiple

channels are adjusted in Stand-alone mode,

but not in Pro Tools Remote mode.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Comments to this Manuals

No comments

DigiDesign D-Control Specifications Page 19

Comments to this Manuals

Related products and manuals for Recording Equipment DigiDesign D-Control